How to use 747 instant adhesive

Push both side of child safty cap and open it.	Twist the red cap counterclock wise. (Non-removable)	Apply adhesive on the only single surface (The volumn is adjustable depending on the degree of turning the cap.)	Press the two surfaces together firmly for few seconds.

How to use general adhesives

Wipe off the rust, dust, moisture and other contami nants from the surface of the objective.	Penetrate the nozzle using red pin.	Apply adhesive on the only single surface as small volumn as possible (Large amount can cause whitening)	Press the two surfaces together firmly for 5 to 10 seconds.

Bond terms

- Working time : It is the time that a mixture is able to coat after two liquid stirring a mixture.
  (Usually the initial viscosity will be double times or nearly 60% of peak heating time.)
- Setting time : It is the time that bond strength and physical properties(tensile, compression, hardness, etc.) are almost stable.
- Tensile strength : It is result of maximum load divided by the area, when the applied adhesive things then test for tensile strength.
- Thixotropy : It is gel in the stationary status. Only it turns to liquidity as application of agitation or vibration. After leaving it, it turn back to the gel status.